Hirschmann GREYHOUND GRS1020 Reference Manual Download Page 252

Page: 252 / 619

Diagnostics

[ Diagnostics > Status Configuration > MAC Notification ]

251

RM GUI GRS

Release

8.0

09/2019

Possible values:



marked

The

MAC Notification

function is active on the port.

The device sends an SNMP trap in case of one of the following events:

–

The device learns the MAC address of a newly connected device.

–

The device unlearns the MAC address of a disconnected device.



unmarked

(default setting)

The

MAC Notification

function is inactive on the port.

The prerequisite for sending SNMP traps is that you enable the function in the

Diagnostics > Status

Configuration > Alarms (Traps)

dialog and specify at least 1 trap destination.

Last MAC address

Displays the MAC address of the device last connected on or disconnected from the port.

The device detects the MAC addresses of devices which are connected as follows:

•

directly connected to the port

•

connected to the port through other devices in the network

Last MAC status

Displays the status of the

Last MAC address

value on this port.

Possible values:



added

The device detected that another device was connected at the port.



removed

The device detected that the connected device was removed from the port.



other

The device did not detect a status.

Buttons

You find the description of the standard buttons in section

“Buttons” on page 13

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands