Hirschmann GREYHOUND GRS1020 Reference Manual Download Page 37

Page: 37 / 619

Basic Settings

[ Basic Settings > Load/Save ]

RM GUI GRS

Release

8.0

09/2019

Encrypted

Displays whether the configuration profile is encrypted.

Possible values:



marked

The configuration profile is encrypted.



unmarked

The configuration profile is unencrypted.

You activate/deactivate the encryption of the configuration profile in the

Configuration encryption

frame.

Encryption verified

Displays whether the password of the encrypted configuration profile matches the password stored

in the device.

Possible values:



marked

The passwords match. The device is able to unencrypt the configuration profile.



unmarked

The passwords are different. The device is unable to unencrypt the configuration profile.

Software version

Displays the version number of the device software that the device ran while saving the

configuration profile.

Fingerprint

Displays the checksum saved in the configuration profile.

When saving the settings, the device calculates the checksum and inserts it into the configuration

profile.

Fingerprint verified

Displays whether the checksum saved in the configuration profile is valid.

The device calculates the checksum of the configuration profile marked as “Selected” and

compares it with the checksum saved in this configuration profile.

Possible values:



marked

The calculated and the saved checksum match.

The saved settings are consistent.



unmarked

For the configuration profile marked as “Selected” applies:

The calculated and the saved checksum are different.

The configuration profile contains modified settings.

Possible causes:

–

The file is damaged.

–

The file system in the external memory is inconsistent.

–

A user has exported the configuration profile and changed the XML file outside the device.

For the other configuration profiles the device has not calculated the checksum.

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands