Hirschmann GREYHOUND GRS1020 Reference Manual Download Page 26

Page: 26 / 619

Basic Settings

[ Basic Settings > Network ]

RM GUI GRS

Release

8.0

09/2019

MAC address

Displays the MAC address of the device. The device management is accessible via the network

using the MAC address.

BOOTP/DHCP

Client ID

Displays the DHCP client ID that the device sends to the BOOTP or DHCP server. If the server is

configured accordingly, then it reserves an IP address for this DHCP client ID. Therefore, the device

receives the same IP from the server every time it requests it.

The DHCP client ID that the device sends is the device name specified in the

System name

field in

the

Basic Settings > System

dialog.

HiDiscovery protocol v1/v2

This frame lets you specify settings for the access to the device using the HiDiscovery protocol.

On a PC, the HiDiscovery software displays the Hirschmann devices that can be accessed in the

network on which the HiDiscovery function is enabled. You can access these devices even if they

have invalid or no IP parameters assigned. The HiDiscovery software lets you assign or change the

IP parameters in the device.

Note:

With the HiDiscovery software you access the device only through ports that are members

of the same VLAN as the device management. You specify which VLAN a certain port is assigned

to in the

Switching > VLAN > Configuration

dialog.

Operation

Enables/disables the HiDiscovery function in the device.

Possible values:



(default setting)

HiDiscovery is enabled.

You can use the HiDiscovery software to access the device from your PC.



Off

HiDiscovery is disabled.

Access

Enables/disables the write access to the device using HiDiscovery.

Possible values:



readWrite

(default setting)

The HiDiscovery software is given write access to the device.

With this setting you can change the IP parameters in the device.



readOnly

The HiDiscovery software is given read-only access to the device.

With this setting you can view the IP parameters in the device.

Recommendation: Change the setting to the value

readOnly

only after putting the device into

operation.

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands