Hirschmann GREYHOUND GRS1020 Reference Manual Download Page 295

Page: 295 / 619

Diagnostics

[ Diagnostics > LLDP > Configuration ]

294

RM GUI GRS

Release

8.0

09/2019

Transmit port description

Activates/deactivates the transmitting of a TLV (Type Length Value) with the port description.

Possible values:



marked

(default setting)

The transmitting of the TLV is active.

The device transmits the TLV with the port description.



unmarked

The transmitting of the TLV is inactive.

The device does not transmit a TLV with the port description.

Transmit system name

Activates/deactivates the transmitting of a TLV (Type Length Value) with the device name.

Possible values:



marked

(default setting)

The transmitting of the TLV is active.

The device transmits the TLV with the device name.



unmarked

The transmitting of the TLV is inactive.

The device does not transmit a TLV with the device name.

Transmit system description

Activates/deactivates the transmitting of the TLV (Type Length Value) with the system description.

Possible values:



marked

(default setting)

The transmitting of the TLV is active.

The device transmits the TLV with the system description.



unmarked

The transmitting of the TLV is inactive.

The device does not transmit a TLV with the system description.

Transmit system capabilities

Activates/deactivates the transmitting of the TLV (Type Length Value) with the system capabilities.

Possible values:



marked

(default setting)

The transmitting of the TLV is active.

The device transmits the TLV with the system capabilities.



unmarked

The transmitting of the TLV is inactive.

The device does not transmit a TLV with the system capabilities.

Neighbors (max.)

Limits the number of neighboring devices to be recorded for this port.

Possible values:



1..50

(default setting:

)

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands