Hirschmann GREYHOUND GRS1020 Reference Manual Download Page 43

Page: 43 / 619

Basic Settings

[ Basic Settings > External Memory ]

RM GUI GRS

Release

8.0

09/2019

Status

Displays the operating state of the external memory.

Possible values:



notPresent

No external memory connected.



removed

Someone has removed the external memory from the device during operation.



The external memory is connected and ready for operation.



outOfMemory

The memory space is occupied in the external memory.



genericErr

The device has detected an error.

Writable

Displays whether the device has write access to the external memory.

Possible values:



marked

The device has write access to the external memory.



unmarked

The device has read-only access to the external memory. Possibly the write protection is

activated in the external memory.

Software auto update

Activates/deactivates the automatic device software update during the restart.

Possible values:



marked

(default setting)

The automatic device software update during the restart is activated. The device updates the

device software when the following files are located in the external memory:

–

the image file of the device software

–

a text file "startup.txt" with the content

autoUpdate=<image_file_name>.bin



unmarked

The automatic device software update during the restart is deactivated.

SSH key auto upload

Activates/deactivates the loading of the RSA key from an external memory upon restart.

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands