Hirschmann GREYHOUND GRS1020 Reference Manual Download Page 179

Page: 179 / 619

Switching

[ Switching > GARP > GMRP ]

178

RM GUI GRS

Release

8.0

09/2019

5.6.1

GMRP

[ Switching > GARP > GMRP ]

The GARP Multicast Registration Protocol (GMRP) is a Generic Attribute Registration Protocol

(GARP) that provides a mechanism allowing network devices and end stations to dynamically

attached to the same LAN segment. GARP also lets the devices distribute the information across

the network devices that support extended filtering services.

GMRP and GARP are industry-standard protocols defined by the IEEE 802.1P.

Operation

Enables/disables the global

GMRP

function in the device. The device participates in GMRP

message exchanges.

Possible values:



GMRP is enabled.



Off

(default setting)

The device ignores GMRP messages.

Multicasts

Unknown multicasts

Enables/disables the unknown multicast data to be either flooded or discarded.

Possible values:



discard

The device discards unknown multicast data.



flood

(default setting)

The device forwards unknown multicast data to every port.

Table

Port

Displays the port number.

GMRP active

Activates/deactivates the port

GMRP

participation.

The prerequisite is that the

GMRP

function is globally enabled.

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands