Hirschmann GREYHOUND GRS1020 Reference Manual Download Page 320

Page: 320 / 619

Advanced

[ Advanced > DHCP Server > Pool ]

319

RM GUI GRS

Release

8.0

09/2019

Remote ID

Specifies the identification of the remote device leasing the IP address.

Possible values:



1..80 bytes (format

XX XX .. XX

)



–

For the IP address assignment, the server ignores this variable.

Circuit ID

Specifies the Circuit ID of the device leasing the IP address.

Possible values:



1..80 bytes (format

XX XX .. XX

)



–

For the IP address assignment, the server ignores this variable.

Hirschmann device

Activates/deactivates Hirschmann multicasts.

If the device in this IP address range serves only Hirschmann devices, then activate this function.

Possible values:



marked

In this IP address range, the device serves only Hirschmann devices. Hirschmann multicasts

are activated.



unmarked

(default setting)

In this IP address range, the device serves the devices of different manufacturers. Hirschmann

multicasts are deactivated.

Configuration URL

Specifies the protocol to be used as well as the name and path of the configuration file.

Possible values:



Alphanumeric ASCII character string with 0..70 characters

Example:

tftp://192.9.200.1/cfg/config.xml

When you leave this field blank, the device leaves this option field blank in the DHCP message.

Lease time [s]

Specifies the lease time in seconds.

Possible values:



1..4294967294

(default setting:

86400

)



4294967295

Use this value for assignments unlimited in time and for assignments via BOOTP.

Default gateway

Specifies the IP address of the default gateway.

A value of

0.0.0.0

disables the attachment of the option field in the DHCP message.

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands