Hirschmann GREYHOUND GRS1020 Reference Manual Download Page 99

Page: 99 / 619

Network Security

[ Network Security > Overview ]

RM GUI GRS

Release

8.0

09/2019

4 Network Security

The menu contains the following dialogs:



Network Security Overview



Port Security



802.1X Port Authentication



RADIUS



DoS



ACL

4.1

Network Security Overview

[ Network Security > Overview ]

This dialog displays the network security rules used in the device.

Parameter

Port/VLAN

Specifies whether the device displays VLAN- and/or port-based rules.

Possible values:



All

(default setting)

The device displays the VLAN- and port-based rules specified by you.



Port: <Port Number>

The device displays port-based rules for a specific port. This selection is available, when you

specified one or more rules for this port.



VLAN: <VLAN ID>

The device displays VLAN-based rules for a specific VLAN. This selection is available, when

you specified one or more rules for this VLAN.

ACL

Displays the

ACL

rules in the overview.

You edit

ACL

rules in the

Network Security > ACL

dialog.

All

Marks the adjacent checkboxes. The device displays the related rules in the overview.

None

Unmarks the adjacent checkboxes. The device does not display any rules in the overview.

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands