Hirschmann GREYHOUND GRS1020 Reference Manual Download Page 107

Page: 107 / 619

Network Security

[ Network Security > 802.1X Port Authentication > Global ]

106

RM GUI GRS

Release

8.0

09/2019

4.3.1

802.1X Global

[ Network Security > 802.1X Port Authentication > Global ]

This dialog lets you specify basic settings for the port-based access control.

Operation

Enables/disables the

802.1X Port Authentication

function.

Possible values:



The

802.1X Port Authentication

function is enabled.

The device checks the access to the network from connected end devices.

The port-based access control is enabled.



Off

(default setting)

The

802.1X Port Authentication

function is disabled.

The port-based access control is disabled.

Configuration

VLAN assignment

Activates/deactivates the assigning of the relevant port to a VLAN. This function lets you provide

selected services to the connected end device in this VLAN.

Possible values:



marked

The assigning is active.

If the end device successfully authenticates itself, then the device assigns to the relevant port

the VLAN ID transferred by the RADIUS authentication server.



unmarked

(default setting)

The assigning is inactive.

The relevant port is assigned to the VLAN specified in the

Network Security > 802.1X Port

Authentication > Port Configuration

dialog,

Assigned VLAN ID

row.

Dynamic VLAN creation

Activates/deactivates the automatic creation of the VLAN assigned by the RADIUS authentication

server if the VLAN does not exist.

Possible values:



marked

The automatic VLAN creation is active.

The device creates the VLAN if it does not exist.



unmarked

(default setting)

The automatic VLAN creation is inactive.

If the assigned VLAN does not exist, then the port remains assigned to the original VLAN.

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands