Hirschmann GREYHOUND GRS1020 Reference Manual Download Page 176

Page: 176 / 619

Switching

[ Switching > MRP-IEEE > MVRP ]

175

RM GUI GRS

Release

8.0

09/2019

Possible values:



The periodic state machine is enabled.

With MVRP

Operation

enabled globally, the device transmits MVRP periodic events in 1 second

intervals, on MVRP participating ports.



Off

(default setting)

The periodic state machine is disabled.

Disables the periodic state machine in the device.

Table

Port

Displays the port number.

Active

Activates/deactivates the port MVRP participation.

Possible values:



marked

(default setting)

With MVRP enabled globally and on this port, the device distributes VLAN membership

information to MVRP-aware devices connected to this port.



unmarked

Disables the port MVRP participation.

Restricted VLAN registration

Activates/deactivates the

Restricted VLAN registration

function on this port.

Possible values:



marked

If enabled and a static VLAN registration entry exists, then the device lets you create a dynamic

VLAN for this entry.



unmarked

(default setting)

Disables the

Restricted VLAN registration

function on this port.

Buttons

You find the description of the standard buttons in section

“Buttons” on page 13

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands