Hirschmann GREYHOUND GRS1020, Reference Manual

Page: 535 / 619

Operation diagnosis
13.3 Security Status
195
UM Config GRS
Release 8.0 09/2019
In order to enable the device to monitor an active link without a connection, first enable the global
function, then enable the individual ports.
Perform the following steps:
security-status monitor http-enabled
Monitors the HTTP server. When you enable the
HTTP server, the value in the
Security status
frame
changes to
error
.
security-status monitor snmp-unsecure
Monitors the SNMP server.
When at least one of the following conditions
applies, the value in the
Security status
frame
changes to
error
:
• The
SNMPv1
function is enabled.
• The
SNMPv2
function is enabled.
• The encryption for SNMPv3 is disabled.
You enable the encryption in the
Device
Security > User Management
dialog, in the
SNMP
encryption type
field.
security-status monitor sysmon-enabled
To monitor the activation of System Monitor 1 in the
device.
security-status monitor extnvm-upd-
enabled
To monitor the activation of the external non
volatile memory update.
security-status monitor iec61850-mms-
enabled
Monitors the
IEC61850-MMS
function. When you
enable the
IEC61850-MMS
function, the value in the
Security status
frame changes to
error
.
security-status trap
When the device status changes, it sends an
SNMP trap.

Open the Diagnostics > Status Configuration > Security Status dialog, Global tab.

For the Link interrupted on enabled device ports parameter, mark the checkbox in the Monitor
column.

To save the changes temporarily, click the button.

Open the Diagnostics > Status Configuration > Device Status dialog, Port tab.

For the Link interrupted on enabled device ports parameter, mark the checkbox in the column
of the ports to be monitored.

To save the changes temporarily, click the button.
enable
Change to the Privileged EXEC mode.
configure
Change to the Configuration mode.
security-status monitor no-link-enabled
Monitors the link on active ports. When the link
interrupts on an active port, the value in the Security
status frame changes to error .
interface 1/1
Change to the interface configuration mode of
interface
1/1
.
security-status monitor no-link
Monitors the link on interface/port
1
.