Hirschmann GREYHOUND GRS1020 Reference Manual Download Page 316

Page: 316 / 619

Advanced

[ Advanced > DHCP Server ]

315

RM GUI GRS

Release

8.0

09/2019

7.2

DHCP Server

[ Advanced > DHCP Server ]

With the DHCP server, you manage a database of available IP addresses and configuration

information. When the device receives a request from a client, the DHCP server validates the

DHCP client network, and then leases an IP address. When activated, the DHCP server also

allocates configuration information appropriate for that client. The configuration information

specifies, for example, which IP address, DNS server and the default route a client uses.

The DHCP server assigns an IP address to a client for a user-defined interval. The DHCP client is

responsible for renewing the IP address before the interval expires. When the DHCP client is

unable to renew the address, the address returns to the pool for reassignment.

The menu contains the following dialogs:



DHCP Server Global



DHCP Server Pool



DHCP Server Lease Table

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands