Hirschmann GREYHOUND GRS1020 Reference Manual Download Page 132

Page: 132 / 619

Network Security

[ Network Security > DoS > Global ]

131

RM GUI GRS

Release

8.0

09/2019

4.5.1

DoS Global

[ Network Security > DoS > Global ]

In this dialog, you specify the DoS settings for the TCP/UDP, IP and ICMP protocols.

TCP/UDP

A scanner uses port scans to prepare network attacks. The scanner uses different techniques to

determine running devices and open ports. This frame lets you activate filters for specific scanning

techniques.

The device supports the detection of the following scan types:



Null scans



Xmas scans



SYN/FIN scans



TCP Offset attacks



TCP SYN attacks



L4 Port attacks



Minimal Header scans

Null Scan filter

Activates/deactivates the Null Scan filter.

The Null Scan filter detects incoming data packets with no TCP flags set and discards them.

Possible values:



marked

The filter is active.



unmarked

(default setting)

The filter is inactive.

Xmas filter

Activates/deactivates the Xmas filter.

The Xmas filter detects incoming data packets with the TCP flags FIN, URG and PUSH set

simultaneously and discards them.

Possible values:



marked

The filter is active.



unmarked

(default setting)

The filter is inactive.

SYN/FIN filter

Activates/deactivates the SYN/FIN filter.

The SYN/FIN filter detects incoming data packets with the TCP flags SYN and FIN set

simultaneously and discards them.

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands