HIKVISION DS-7200-SH User Manual Download

Page: 99 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

Figure 7.2 Quick Export using USB1-1

In the Export interface, choose backup device and click

Export

button to start exporting.

Note:

Here we use USB Flash Drive and please refer to the next section Normal Backup for more

backup devices supported by the device.

Stay in the Exporting interface until all record files are exported to the USB flash drive.

Figure 7.3 Export Finished

Check backup result.

Choose the record file in Export interface and click button

to check it.

Note:

The Player player.exe will be exported automatically during record file export.

Figure 7.4 Checkup of Quick Export Result Using USB1-1

Summary of Contents for DS-7200-SH





























































































































































































Search results

Summary of Contents for DS-7200-SH

Reviews:

Related manuals for DS-7200-SH

Brands by name

Popular brands

HIKVISION DS-7200-SH, User Manual

Search results

Summary of Contents for DS-7200-SH

Reviews:

Related manuals for DS-7200-SH

Brands by name

Popular brands