HIKVISION DS-7200-SH User Manual Download

Page: 108 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

10
6

7.2 Managing Backup Devices

Management of USB flash drive, USB HDD and eSATA HDD.

Note:

The eSATA HDD is supported by DS-7300-SH and DS-8100-SH models only.

Enter Search Result interface of record files.

Menu>Export>Normal

Set search condition and click

Search

button to enter Search Result interface.

Note:

At least one channel shall be selected.

Figure 7.23 Normal Video Search

Select record files you want to back up.

Click

Export

button to enter Export interface.

Note:

At least one record file shall be selected.

Figure 7.24 Result of Normal Video Search for Backup

Summary of Contents for DS-7200-SH





























































































































































































Search results

Summary of Contents for DS-7200-SH

Reviews:

Related manuals for DS-7200-SH

Brands by name

Popular brands

HIKVISION DS-7200-SH, User Manual

Search results

Summary of Contents for DS-7200-SH

Reviews:

Related manuals for DS-7200-SH

Brands by name

Popular brands