HIKVISION DS-7200-SH User Manual Download Page 98

Page: 98 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

7.1 Backing up Record Files

Before you start:

Please insert the backup device(s) into the device.

7.1.1 Quick Export

Purpose:

Export record files to backup device(s) quickly.

Steps:

Enter Video Export interface.

Menu>Export>Normal

Figure 7.1 Quick Export Interface

Choose the channel(s) you want to back up and click

Quick Export

button.

Notes:

1. The time duration of record files on a specified channel cannot exceed 24 hours. Otherwise, the

message box “Max. 24 hours are allowed for quick export.” will pop up.

2. The number of channels for synchronous export cannot exceed 4. Otherwise, the message box “Max.

4 channels are allowed for synchronous quick export.” will pop up.

Summary of Contents for DS-7200-SH





























































































































































































Search results

Summary of Contents for DS-7200-SH

Reviews:

HIKVISION DS-7200-SH, User Manual, Page: 98 / 188

Search results

Summary of Contents for DS-7200-SH

Reviews: