Hella Gutmann SEG V, User Manual

Page: 97 / 1106

EN
SEG V Device configuration
Configuring the SEG V
7.6.7.1 Having Indicated Light Distribution Images
Proceed as follows to display light distribution images on the report:
1. Open the list under Images with .
If >With images< is selected, the light distribution will appear on the report.
If >No image< is selected, no light distribution appears on the report.
The prevailing selection will be saved automatically.
7.6.8 Level compensation
Activate the level compensation and make settings here.
A level sensor registers the inclination angle of the SEG V and compensates floor unevenness and inclinations of up to
2% to prevent improper measurements.
7.6.8.1 Executing Manual Level Compensation
Proceed as follows to perform the manual level compensation:
1. Select Settings > Device > Extended in the main menu.
2. Open the selection window under Level compensation with .
3. Open the list under Level compensation with .
4. Select >Manual< .
If >Manual< is selected, the vertical and horizontal axis level can be manually determined. This compensates
unevenness/inclinations in the set-up area of the SEG V and the vehicle.
5. Open the virtual keypad under Pitch angle in % with .
6. Enter the desired value and apply.
7. Repeat steps 5-7 to make further entries.
8. Confirm the inputs with . Abort the procedure with .
The inputs are saved automatically.
Automatic level compensation continues to remain operational in this mode.
7.6.8.2 Executing Automatic Level Compensation
Proceed as follows to do the automatic level compensation:
1. Select Settings > Device > Extended in the main menu.
2. Open the selection window under Level compensation with .
3. Open the list under Level compensation with .
4. Select >Automatic< .
If >Automatic< is selected, the level of the vertical and horizontal axis adjusts automatically so that any
unevenness in the SEG V set-up area is compensated for.
The SEG V is balanced from a measuring technology standpoint.
5. Confirm the selection with . Abort the procedure with .
The selection is saved automatically.
97