Hella Gutmann SEG V, User Manual

Page: 95 / 1106

EN
SEG V Device configuration
Configuring the SEG V
2. Call up Password management with .
NOTICE
The length of the password must not exceed 10 characters.
3. Enter a password and confirm by entering it again.
4. Observe the warning notice and confirm.
The device can now be accessed only with the selected password.
7.6 Configuring the SEG V
Here you can calibrate the display brightness, light measuring unit and level compensation, for example.
7.6.1 Setting the Display Brightness
Proceed as follows to set the display brightness:
1. Select Settings > Device > Save energy in the main menu.
2. Open the list under Display brightness with .
3. Select the requested brightness value.
The display brightness is adjusted immediately. The selection is saved automatically.
7.6.2 Automatic Display Dimming
Proceed as follows to activate or deactivate the display dimming:
1. Select Settings > Device > Save energy in the main menu.
2. Open the list under Automatic display dimming with .
3. Select >On< or >Off< .
If >On< is selected, the display brightness will be automatically dimmed to the minimum brightness value after 5
minutes of inactivity.
The selection is saved automatically.
7.6.3 Automatic Switching Off in Case of Inactivity
Proceed as follows to activate or deactivate the automatic display dimming in case of inactivity:
1. Select Settings > Device > Save energy in the main menu.
2. Open the list under Automatic display dimming in case of inactivity with .
3. Select >On< or >Off< .
The SEG V will switch off automatically after 30 minutes if >On< is selected.
The selection is saved automatically.
7.6.4 Calibrate touch screen
Proceed as follows to calibrate the touch screen:
1. Select Settings > Device > Extended in the main menu.
95