Hella Gutmann SEG V, User Manual

Page: 136 / 1106

EN
General information:
SEG V
Troubleshooting
9 General information:
9.1 Troubleshooting
The following list will help you to solve minor problems yourself. Select the relevant problem description and check
and perform the steps listed under
Solution in sequence until the problem is solved.
Problem Solution
The device does not
boot.
• Check the cable connection to the device and plug socket.
• Ensure voltage supply.
• Charge the battery for 15 minutes and then restart the device.
The program crashes or
does not function.
• Press and hold the ON/OFF button for 30 s to restart the device.
• Perform a software update.
No measurement
possible.
Enter the company data as described in section Entering company data (Page,
Seite, Page, Page, Pagina, Página, Pagina, Strona, Side, Sida, Página, Sayfa,
Strana, Oldal, Sivu, Pagina, and Strana 94)
.
Display is dark.
• Check the cable connection to the device and plug socket.
• Ensure voltage supply.
• Charge the battery for 15 minutes and then restart the device.
• Press and hold the ON/OFF button for 30 s to restart the device.
• The display is possibly defective. Please inform the Hella Gutmann trading partner
or the Technical Help Line of Hella Gutmann.
9.2 Care and Maintenance
Like every tool, the SEG V must be handled with care. Therefore regard the following:
• Regularly clean the device with non-aggressive cleaning agents.
• Use commercial mild household cleaning detergents and a moistened, soft cleaning cloth.
• Replace damaged cables/accessories immediately.
• Only use original spare parts.
To readjust the column guidance, use an Allen key with width SW 6 for the
opening.
9.2.1 Replacing the 9 Volt Block Battery
Proceed as follows to replace the 9 V block battery:
136