Hella Gutmann SEG V, User Manual

Page: 94 / 1106

EN
Device configuration SEG V
Setting company data
7.3 Setting company data
Enter the company data that shall appear on the hard-copy printout, e.g.:
• Company address
• Fax number
• Homepage
7.3.1 Entering Company Data
Proceed as follows to enter the company data:
1. Select Company > under Settings in the main menu.
2. Open the virtual keypad under Company name with .
3. Enter the company name.
4. Click to close the virtual keypad.
The input will be saved automatically.
5. Repeat steps 2–4 to make more inputs.
7.4 Configuring users
7.4.1 Entering the User Name
Here you can manage the different users.
Proceed as follows to enter the user name:
1. Select the main menu Settings , then > User .
2. Open the virtual keypad with .
3. Enter the desired user name.
4. Click to close the virtual keypad.
The input will be saved automatically.
7.5 Installing Password Protection
The introduction of the General Data Protection Regulation (GDPR) of the European Union which came into force on 25
May 2018 includes the requirement to ensure better protection for customer-related data in devices.
To prevent access to our diagnostic devices by third parties, we have integrated the function Password protection .
NOTICE
If the device no longer has a valid password, it can only be reactivated with the menu >Starting
the factory reset< or with the help of the Hella Gutmann's Technical Help Line. In this case
personal data and the Car History will be cleared, and it might not be possible to restore them
again.
Proceed as follows to set up the password protection:
1. Select the main menu Settings , then > User .
94