18
FUNCTIONAL & DISPLA
Y DESCRIPTION
6.6. OPENING THE ENCLOSURE
The front panel is hinged at the front of the enclosure for easy access to wiring locations. To open the
enclosure, loosen the four captive screws enough for the springs to push them out.
Selection of mounting location should be such that allows the front panel to swing open fully and that
there is adequate room around the mounting location for wire routing.
CAUTION
Disconnect po
wer suppl
y
prior to co
ver remova
l.
No user-se
rviceable
parts
inside. Ref
er servicing to
qualified se
rvice per
sonnel.
STATIC SENSITIVE
DEVICE
Figure 3:
HI510 Enclosure Opened
Figure 4:
Hinged Front Panel
