55
MENU
Press
Set,
to modify the value. The flashing value indicates that it can be modified. Press the
keys followed by
CFM,
to save. Once confirmed, the value stops flashing. Press the key to return
to the menu.
Delay Off Time
Option:
5 to 999 seconds
Delay Off Time is an off delay timer. Once the alarm becames active it stays active for
n
units of time,
even if the alarm condition is not met.
Press
Set
to modify. The flashing value indicates that it can be modified by pressing the
keys
followed by
CFM,
to save. Once confirmed, the value stops flashing. Press the key, to return to
the menu.
Note:
The controller validates the configured Setup when attempting to exit menu and directs the
user to any invalid parameters. At prompt to save changes, press
YES.
11.2. HOLD MODE
Hold Mode is the second item under Menu selections. When Hold Mode is selected
Man On
or
Man
OFF
virtual keys are visible.
11.2.1. Turning On Manual Hold
The Hold Mode submenu is used to turn on or off a manual Hold. It can also be used to configure a
remote hold feature that uses a digital Input Trigger.
Selecting
Man On
initiates the procedure detailed below.
1. Select
Man On
(or
OFF
)
2. At prompt, enter the passcode
3. Select
Man On
(or
OFF
) again
