manualshive.com logo in svg

Hanna Instruments HI510, Instruction Manual

Share
Download
Hanna Instruments HI510 Instruction Manual Download Page 17

17

FUNCTIONAL & DISPLA

Y DESCRIPTION

6.4.  CONTEXTUAL HELP

• 

HI510 

offers an interactive contextual help mode that assists the user at any time.

• To access the help screen, press the diagnostic (?DIAG   ) key. The instrument will display 

additional information related to the current screen. To read all the available information, scroll the 
text using the 

 keys.

• To exit help mode, press the back (   ) key and the controller returns to the previous screen.

6.5.  USB-C PORT

The USB-C port is located on the right side of the controller. Users can connect a USB flash-drive 
(either directly or through an adapter) or a cable, to this port. 

Note: 

The flash drive should not be pulled out of the USB-C port while it is still in operation.

USB

1

USB-C Port

1
2 Venting element

2

Figure 2: 

USB-C Port & Venting Element

Summary of Contents for HI510













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands