83
MENU
5. Once the password has been enabled, the controller displays the confirmation screen and a check
mark will appear.
Note:
After the password has been enabled, Setup changes are password protected. Entering
the password unlocks the controller
–
▷
. In measure mode, the controller is automatically locked
again after 10 seconds
–
▷
.
To disable the password requires the following:
1. Press
Modify
and press the
keys to enter the password.
2. Ignore prompt to enter new password and press
Disable.
The password is automatically disabled.
Note:
If the password is entered incorrectly five times, users will require assistance from Hanna
Instruments service team.
Controller ID
Option:
0000 to 9999
With Controller ID selected, press
Set
to modify. Press the key to enter the digit. Keep the key
(or key) pressed to increment (or decrement) by one, every second. Press
CFM,
to save.
