manualshive.com logo in svg

Hach DR 6000, User Manual

Share
Download
Hach DR 6000 User Manual Download Page 99

99

Expanded programs

6.1.4.3

Delete program

1.

Press 

Delete.

2.

Press 

OK

 to confirm.

The program will be deleted from the list of user programs.

Note: If the stored program is deleted in User Programs, it will also 
be deleted in Favorites Programs.

6.2

Favorites

The most frequently used tests/methods in the 

Stored Programs

 

menu and the 

User Programs

 menu can also be added to the list 

of favorites to simplify their selection.

To add 

Stored Programs

 and/or 

User Programs

 to the favorites 

list or the favorite programs, refer to 

section 6.1.4, page 97

.

6.2.1

Recall a favorite program

1.

Press 

Favorite Programs

 in the Main Menu. 

The "Favorite Programs" list will appear.

2.

Highlight the selection by pressing it.

Note: Use the scroll bar to scroll through the list quickly.

Note: Press Select by Number to search for the program by 
number. Use the alphanumeric keypad to enter the test number 
(program number) and confirm the input by pressing OK.

3.

Press

 Start

.

6.2.2

Delete a favorite program

1.

Press 

Favorite Programs

 in the Main Menu.

The "Favorite Programs" list will appear.

2.

Highlight the selection by pressing it.

Note: Use the scroll bar to scroll through the list quickly.

Note: Press Select by Number to search for the program by 
number. Use the alphanumeric keypad to enter the test number 
(program number) and confirm the input by pressing OK.

3.

Press 

Remove program.

Summary of Contents for DR 6000





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands