Hach DR 6000 User Manual Download Page 30

Page: 30 / 156

Standard programs

Press

New

to enter another sample ID.

Press

Delete

to delete a sample ID.

Press

Edit

to edit a sample ID.

Press

Initialize RFID Tag

to write the sample ID to an

optional location RFID tag (not available on all models).

5.2.2.1

Sample ID with scanner method 1

Connect the scanner to the USB port.

Successful connection is indicated by a sound.

Press

Sample ID > Options

and

New

Read barcode with scanner.

The sample ID can have the current date and time, a
sequential number and a colour allocated to it.
Select the required options or a colour.

Press

to confirm the entry.

Press

New

again and repeat the process for each barcode.

5.2.2.2

Sample ID with scanner method 2

Read the sample ID on the screen with the barcode scanner
and perform measurement.

The barcode is stored along with the reading, but is not
adopted into the list of sample IDs.

Note: To delete a sample ID, select the ID and press Delete.

Note: A sample ID can be entered or changed in Reading Mode. To do
so, press the icon for the sample ID in the toolbar.

Summary of Contents for DR 6000




























































































































































Search results

Summary of Contents for DR 6000

Reviews:

Brands by name

Popular brands

Hach DR 6000, User Manual

Search results

Summary of Contents for DR 6000

Reviews:

Brands by name

Popular brands