Hach DR 6000 User Manual Download Page 67

Page: 67 / 156

Standard programs

Description of the table of readings

•

The

first

column shows the standard addition volume. 0 mL

stands for the sample without added standard.

•

The

second

column shows the reading of the samples with

and without added standard.

•

The

third

column shows the detection rate of the added

standard.

Note: The blue highlighted line is active.

The measurement result of the sample without added
standard is automatically shown under 0 mL.

Prepare the standard addition solution as described in the
procedure.

10.

Press the standard addition volume in the table.

11.

Insert the cell with the respective addition volume into the
cell compartment.

12.

Press

Read

Repeat the procedure with all the other standard addition
solutions.

13.

After all the standard addition solutions have been
measured, press

Graph

The regression line through the standard addition data points
is displayed.

The correlation coefficient r

indicates how close the data

points are to the line.

If the correlation coefficient = 1, the curve is linear.

The concentration shown above the curve is the estimated
concentration of the sample without the added standard.

Note: In the Graph menu, the name on the Graph key switches to
Table. Press Table to display all the data in the table again.

14.

Press

Ideal Line

to display the relationship between the

additions and the ideal line (detection rate 100%).

Summary of Contents for DR 6000




























































































































































Search results

Summary of Contents for DR 6000

Reviews:

Brands by name

Popular brands

Hach DR 6000, User Manual

Search results

Summary of Contents for DR 6000

Reviews:

Brands by name

Popular brands