manualshive.com logo in svg

Hach DR 6000, User Manual

Share
Download
Hach DR 6000 User Manual Download Page 23

23

Section 4

Startup

4.1

Switch on the instrument, startup process

1.

Connect the power cable to a power socket.

2.

Switch on the instrument via the power switch on the back.

3.

The device automatically starts an approximately 45 second 
long startup process. The display shows the logo of the 
manufacturer. At the end of the startup process, a startup 
melody is heard.

Note: Wait approximately 20 seconds before switching on again so as 
not to damage the electronics and mechanics of the instrument.

4.2

Language selection

The DR 6000 software includes several language options. The 
first time the instrument is switched on, the language selection 
screen will be shown automatically after the startup process.

1.

Select the required language.

2.

Press 

OK

 to confirm the language selection. The self-check 

will then start automatically.

Change the language setting

The device works in the selected language until the option is 
changed.

1.

Turn the instrument on.

2.

During the startup process, touch the display at any point 
until (approximately 45 seconds) the list for the selection of a 
language is shown.

3.

Select the required language.

4.

Press 

OK

 to confirm the language selection. The self-check 

will then start automatically.

4.3

Self-check

Each time the instrument is powered up, a test program begins.

This procedure, which takes approximately two minutes, checks 
the system, lamp, filter adjustment, wavelength calibration and 
voltage. Each checked function is marked accordingly on the 
display.

The Main Menu is displayed when diagnostics are completed.

Note: In the event of further error messages during the test program, 
refer to 

Section 8, Page 139

.

Summary of Contents for DR 6000





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands