Hach DR 6000 User Manual Download Page 82

Page: 82 / 156

Expanded programs

Chemical form:

Enter the chemical formula used in the display to represent
the analysis parameter.

Press

Continue

Note: For subsequent programming steps, refer to

section 6.1.1.3

onwards.

6.1.1.2

Multi wavelength settings

When selecting the Multi-Wavelength mode, the following
parameters can be defined:

Units:

Select the required unit from the list

Press

Continue

Note: User-specific units not included in this list can be added in the edit
program under Program Options, Edit. Select Units, Edit and then
New.

Absorbance formula (Multi Wavelength program type):

Define the wavelengths and the coefficients used in the formula.
The absorbance formula defines the calculation for the multi
wavelength reading.

Press

Formula

Select the formula relevant to the programming from the
displayed list.

Press

to confirm the selection.

List of the available absorbance formulae

refers to the absorbance at wavelength 1

refers to the absorbance at wavelength 2, etc.

refers to the coefficient at wavelength 1

refers to the coefficient at wavelength 2, etc.

If a subtraction has to be performed, the factors can be entered
with a minus sign.

Summary of Contents for DR 6000




























































































































































Search results

Summary of Contents for DR 6000

Reviews:

Brands by name

Popular brands

Hach DR 6000, User Manual

Search results

Summary of Contents for DR 6000

Reviews:

Brands by name

Popular brands