Hach DR 6000 User Manual Download Page 127

Page: 127 / 156

127

Expanded programs

11.

Press

Options

to set further functions:

New

: Defines an additional pipette.

Delete

: Deletes a defined pipette.

Edit

: Modifies settings for a defined pipette.

Reminder

: Defines a reminder interval to determine when

the user is prompted to return to this AQA measurement.

History

: List of all previously performed pipette checks.

12.

Press

Close

to exit the options menu.

6.7.5

Instrument backup

Prior to the next service date, the "

Instrument Backup

" offers

the opportunity to store all programs, measurement data, user
IDs, passwords, as well as all adjustable data on a USB stick.

Press

Instrument Backup

in the "System Check" menu.

Insert the USB stick (refer to

section 3.5, page 20

Press

Store

to start a Backup.

If the file was stored, the message "Instrument Backup is stored"
will be displayed.

Press

to return to the "System Check" menu.

Restore backup data:

Note: All current data will be overwritten when restoring the Backup file!

Press

Instrument Backup

in the "System Check" menu.

Insert the USB stick with the backup (refer to

section 3.5,

page 20

Press

Restore

to pass back the data.

Summary of Contents for DR 6000




























































































































































Search results

Summary of Contents for DR 6000

Reviews:

Brands by name

Popular brands

Hach DR 6000, User Manual

Search results

Summary of Contents for DR 6000

Reviews:

Brands by name

Popular brands