Hach DR 6000 User Manual Download Page 51

Page: 51 / 156

Standard programs

Tap on

Table

to display details.

Note: Press View List to return to the "Recall Data" list.

5.3.3.3

Send data from wavelength scan or time course

There are two ways to send data to a USB memory stick, printer,
PC or installed network drive with Hach Data Trans.

Option 1:

Press

Recall Data

in the Main Menu and then

Wavelength

Scan

Time Course

Press

Option

and then press the

PC & printer symbol

send the data to a USB storage device, printer, PC or
network drive with Hach Data Trans.

•

When a printer is connected, you must select how the
data should be sent to the printer (as graph, table or
graph and table).

•

If a USB storage device is connected, the files are
automatically sent as xml- or csv files to the file folder
"WLData" (data of a wavelength scan) or "TCData" (data
of a time course) on the USB storage device/or moved
into the folder.

•

If a network drive has been installed under

Instrument

Setup > PC & Printer > Network > Setup

and csv or xml

has been selected as the data format, the data is sent to
the network drive.

The file name will be formatted as: "ScanData_X.csv"
(Wavelength Scan Data) or "TCData_X.csv" (Time Course
Data).
X = number of scans (1–20).

For further processing use a spreadsheet program.

Note: The message, "Data already present. Overwrite?" is displayed if
the files are already stored. Press OK to overwrite the stored data.

Summary of Contents for DR 6000




























































































































































Search results

Summary of Contents for DR 6000

Reviews:

Brands by name

Popular brands

Hach DR 6000, User Manual

Search results

Summary of Contents for DR 6000

Reviews:

Brands by name

Popular brands