Hach DR 6000 User Manual Download Page 83

Page: 83 / 156

Expanded programs

Wavelength



Press the



buttons.

The number of wavelengths results from the calculation
formula.

Enter the required wavelengths.

If necessary, repeat until all values for the formula have been
entered.

The entered wavelengths must be in the range from
190-1100 mm.

Press

to confirm.

Concentration factor K

The concentration factor K

is a multiplication factor to convert

absorbance values into concentration values.

Press the

buttons.

The number of the concentration factors results from the
calculation formula.

Enter the required factor.

If necessary, repeat until all the values for the formula have
been entered.

Press

to confirm.

Press

Continue

Note: Up to 5 digit place values can be entered. A maximum of 4
decimal places are possible.

Concentration resolution (number of decimal places)

Select the required number of decimal places to be
displayed after the decimal point from the list.

Press

Continue

Chemical form:

Enter the chemical formula used in the display to represent
the analysis parameter.

Press

Continue

Summary of Contents for DR 6000




























































































































































Search results

Summary of Contents for DR 6000

Reviews:

Brands by name

Popular brands

Hach DR 6000, User Manual

Search results

Summary of Contents for DR 6000

Reviews:

Brands by name

Popular brands