52
Right-click Menu
3.2.2 Switching Main/Aux Output
Note:
Refer to
Chapter 3.2 Operations in Live View Mode
for the main and aux output
relationship.
The CVBS output only serves as the aux output or live view output.
Step
1
Use the mouse wheel to double-click on the HDMI1/VGA, or HDMI2, or HDMI/VGA
output screen, and the following message box pops up.
Step
2
Use the mouse wheel to double-click on the screen again to switch to the aux output,
or click
Cancel
to cancel the operation.
Step
3
Select the
Menu Output Mode
to others
from the right-click menu on the monitor.
Step
4
On the pop-up message box, click
Yes
to reboot the device to enable the selected
menu output as the main output.
Note:
You can select the
Menu Output Mode
under Menu>Configuration>General>More
Settings to
Auto
,
HDMI1/VGA
and
HDMI2
(for GD-RT-AT5016N) or
Auto
and
HDMI/VGA
(for other models) and then reboot the device to switch the main output.
3.2.3 Quick Setting Toolbar in Live View Mode
On the screen of each channel, there is a quick setting toolbar which shows when you click
the screen.
Quick Setting Toolbar
You can refer to the table below for the description of Quick Setting Toolbar icons.
Summary of Contents for GD-RT-5008P
Page 2: ......
Page 134: ...134 Set PTZ Linking Step 8 Click OK to save the settings...
