22
No. Name
Description
Press for Arming/disarming the device in Live View mode.
9
PLAY Button
The button is used to enter the All-day Playback mode.
It is also used to
auto scan in the PTZ Control menu.
10
PREV Button
Switch between single screen and multi-screen mode.
In PTZ Control mode, it is used to adjust the focus in conjunction
with the A/FOCUS+ button.
Troubleshooting the Remote Control:
Note:
Make sure you have installed batteries properly in the remote control. And you have to aim
the remote control at the IR receiver on the front panel.
If there is no response after you press any button on the remote, follow the procedure
below to troubleshoot.
Step
1
Go to
Menu > Configuration > General > More Settings
by operating the front
control panel or the mouse.
Step
2
Check and remember the DVR No. The default DVR No. is 255. This number valid
for all IR remote controls.
Step
3
Press the DEV button on the remote control.
Step
4
Enter the DVR No. in step 2.
Step
5
Press the ENTER button on the remote.
If the Status indicator on the front panel turns blue, the remote control is operating properly.
If the Status indicator does not turn blue and there is still no response from the remote,
please check the following:
Step
6
Batteries are installed correctly and the polarities of the batteries are not reversed.
Step
7
Batteries are fresh and not out of charge.
Step
8
IR receiver is not obstructed.
If the remote still cannot function properly, please change the remote and try again, or
contact the device provider.
1.5 USB Mouse Operation
A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this DVR. To
use a USB mouse:
Summary of Contents for GD-RT-5008P
Page 2: ......
Page 134: ...134 Set PTZ Linking Step 8 Click OK to save the settings...
