Grundig GD-RT-5008P, User Manual

Page: 48 / 216

48
 Only specified PoC camera is supported.
 The maximum connectable AT/AF camera number varies with different models.
 Do not unplug or plug the PoC camera if it is powered by the external power supply.
2.9 Configuring Signal Input Channel
Note:
This chapter is only applicable to GD-RT-AT5016N.
You can configure the analog and IP signal input types and enable 5 MP long distance
transmission.
Step 1
Go to Menu > Camera > Signal Input Status .
Step 2
Check the checkbox to select different signal input types: HD/CVBS and IP. If you
select HD/CVBS, four types of analog signal inputs including HD-TVI, AHD, HDCVI,
and CVBS can be connected randomly for the selected channel. If you select IP, IP
camera can be connected for the selected channel.
Step 3
Click Apply to save the settings.
Note:
You can view the max. accessible number of IP cameras in the Max. IP Camera Number
text field. For GD-RT-AT5016N, disabling one analog channel will add one IP channel. For
GD-RT-AT5016N, the accessible IP channels are X+2 (X refers to the disabled analog
channel(s) of the DVR.).
2.10 Configuring 5 MP Long Distance Transmission
Note:
This chapter is only applicable to GD-RT-AP5004P, GD-RT-AP5008P, GD-RT-AP5016N,
GD-RT-AT5016N.
For GD-RT-AP5004P, GD-RT-AP5008P, GD-RT-AP5016N, GD-RT-AT5016N, you can
configure 5 MP long distance transmission on the Signal Input Status interface.
Step 1
Go to Menu > Camera > Signal Input Status .
Step 2
Click to enter the 5 MP Long Distance Transmission Settings interface.
Step 3
Check the checkbox to enable 5 MP Long Distance Transmission of the selected
channel.
Step 4
Click Apply to save the settings.