Grundig GD-RT-5008P, User Manual

Page: 50 / 216

50

Playback: play back the recorded videos for current day.

Aux/Main Monitor: the DVR checks the connection of the output interfaces to define
the main and auxiliary output interfaces. When the aux output is enabled, the main
output cannot do any operation, and you can do some basic operation on the live view
mode for the Aux output.
For GD-RT-AT5016N , there are two HDMI interfaces. HDMI1 and VGA interfaces share
simultaneous output. The priority level for the main and aux output is HDMI2> VGA/HDMI1.
The CVBS output only serves as the aux output or live view output. The priority relationship
is shown as Table 3-2.
Table 3-2 Priorities of Outputs for GD-RT-AT5016N
S.N HDMI2 VGA/HDMI1 CVBS Main output
Auxiliary
output For Live View Output
Only
1 √ √ √ or × HDMI2 VGA/HDMI1 CVBS
2 √ or × × √ or × HDMI2 CVBS VGA/HDMI1
3 × √ √ or × VGA/HDMI1 CVBS HDMI2
For other DVR with CVBS output, the VGA/HDMI output is the main output, and the CVBS
output is the aux output. The priority relationship is shown as Table 3-3.
Table 3-3 Priorities of Outputs
S.N HDMI VGA CVBS Main output Auxiliary output
1 √ or × √ or × √ or × VGA/HDMI CVBS
Note:
√ means the interface is in use, × means the interface is out of use or the connection is
invalid. And the HDMI, VGA and CVBS can be used at the same time.
3.2.1 Using the Mouse in Live View
You can refer to Table 3-4 for the description of mouse operation in live view mode.
Table 3-4 Mouse Operation in Live View
Name Description
Menu Enter the main menu of the system by right clicking the
mouse.
Single
Screen Switch to the single full screen by choosing channel
number from the drop-down list.