141
Draw Area for Intrusion Detection
Step
8
Click
Apply
to save the settings.
Note:
The sudden scene change detection and the intrusion detection cannot be enabled at the
same channel.
10.5 Region Entrance Detection
This function may not be available in each recorder model.
Region entrance detection function detects people, vehicle or other objects which enter a
pre-defined virtual region from the outside place, and some certain actions can be taken
when the alarm is triggered.
Step
1
Go to
Menu > Camera > VCA
.
Step
2
Select the camera to configure the VCA.
You can check the checkbox of
Save VCA Picture
to save the captured pictures of
VCA detection.
Step
3
Select the VCA detection type to
Region Entrance Detection
.
Step
4
Check the
Enable
checkbox to enable this function.
Step
5
Click
to configure the trigger channel, arming schedule, linkage action and PTZ
linking for the region entrance detection alarm.
Step
6
Click the
Rule Settings
button to set the sensitivity of the region entrance detection.
Sensitivity:
Range [0-100]. The higher the value is, the more easily the detection
alarm can be triggered.
Summary of Contents for GD-RT-5008P
Page 2: ......
Page 134: ...134 Set PTZ Linking Step 8 Click OK to save the settings...
