153
The valid value of MTU is from 500 to 1500.
If the DHCP server is available, you can check the checkbox of
Enable
DHCP
to
automatically obtain an IP address and other network settings from that server.
If DHCP is enabled, you can check the checkbox of
Enable DNS DHCP
or uncheck
it and edit the
Preferred DNS Server
and
Alternate DNS Server
.
Step
3
After having configured the general settings, click the
Apply
button to save the
settings.
12.2 Configuring the Advanced Settings
12.2.1 Configuring the PPPoE Settings
The DVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Step
1
Go to
Menu > Configuration > Network > PPPoE
.
PPPoE Settings Interface
Step
2
Check the
Enable
PPPoE
checkbox to enable this feature.
Step
3
Enter
User Name
and
Password
for PPPoE access.
Note:
The User Name and Password should be assigned by your ISP.
Step
4
Click the
Apply
button to save the settings.
Step
5
After successful settings, the system asks you to reboot the device to enable the
new settings, and the PPPoE dial-up is automatically connected after reboot.
You can go to Menu > Maintenance > System Info > Network interface to view the
status of PPPoE connection.
Summary of Contents for GD-RT-5008P
Page 2: ......
Page 134: ...134 Set PTZ Linking Step 8 Click OK to save the settings...
