Gridstore GS-1000-2 Administrator'S Manual Download Page 121

Page: 121 / 143

120

Tip:

You can click the arrow button in the upper-right of a sub-window to open or close the

sub-window. See the red, circled arrow in the image below.

Health Status Icons

Every vPool, vStore and Gridstore Storage Node displays a health status icon. Options include the

following.

Healthy - the vPool, vStore or Gridstore Storage Node is healthy and running.
Stopped - the vPool, vStore or Gridstore Storage has been stopped using GridControl.

Warning - the vPool, vStore or Gridstore Storage is in a state that requires attention, such as

when Gridstore Storage Nodes are reaching capacity.

Fault - the vPool, vStore or Gridstore Storage is in a compromised state that requires

immediate attention, such as when one of the Gridstore Storage Nodes has failed.

Statistics

Every selected vPool, vStore and Gridstore Storage Node displays a table of statistics to the right.

Summary of Contents for GS-1000-2
















































































































































Search results

Summary of Contents for GS-1000-2

Reviews:

Related manuals for GS-1000-2

Brands by name

Popular brands

Gridstore GS-1000-2, Administrator'S Manual

Search results

Summary of Contents for GS-1000-2

Reviews:

Related manuals for GS-1000-2

Brands by name

Popular brands