GRASS VALLEY T2 Elite User Manual Download Page 48

Page: 48 / 273

(3)

[Locked]

Locks R1 channel operations.
While the operations are locked, [Locked]

and [R1] buttons light in red.
Tapping it again releases the lock.

(4)

Preview

Displays the video currently inputted.
Tapping the preview displays in the full

screen view.

(5)

[Cur:]

Indicates the current timecode inputted.

(6)

Scrubbing bar

Indicates the recording progress status.

(7)

[Elap:]

Indicates the elapsed time of recording by

timecode display.

(8)

Audio level display

Displays input audio level.

(9)

[Menu]

Displays menu

such as properties of clip

and rename, unload, set the clip name for

next ingest file, etc.

(10)

Recording mode

Switches the recording mode (R1-live mode

/R1-VTR mode/R1-remote mode).

(11)

Operation buttons

Operation buttons of R1 channel

►

P49

(12)

[Clip:]

Displays the name of the clip currently

recorded.

(13)

[Saving destination]

Sets the saving destination of the recorded

clip.
The destination bin name is displayed in

the right. If the saving destination is an

external storage, it changes to green.

(14)

[Length:]

If [Fixed Length] is on, sets the time length

(duration) from the start point to the end

point of recording by tapping the timecode.

(15)

[In:]/[Out:]/[Dur:]

Indicates the timecode of In/Out points and

duration.

If fixed length recording mode is off, you

can set In or Out point by tapping the

timecode of [In:] or [Out:].

T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express User Manual

May 16, 2016

Section 5 ― Recording

Summary of Contents for T2 Elite


















































































































































































































































































Search results

Summary of Contents for T2 Elite

Reviews:

Related manuals for T2 Elite

Brands by name

Popular brands

GRASS VALLEY T2 Elite, User Manual

Search results

Summary of Contents for T2 Elite

Reviews:

Related manuals for T2 Elite

Brands by name

Popular brands