GRASS VALLEY T2 Elite User Manual Download Page 207

Page: 207 / 273

[Compression]

[File type :]

Selects the compression format from [Grass

Valley HQ(AVI)], [XDCAM HD422(MXF)],

[XDCAM HD(MXF)], [XDCAM IMX(MXF)],

and [XDCAM DV(MXF)].

[Bitrate :]

Selects a bit rate that supports the compression

format.

[HQ 150Mbps MAX]

By checking, restricts the compression ratio of

Grass Valley HQ Codec to 150 Mbps.

[Audio format :]

Selects an audio format that supports the

compression format.

[ClosedGOP]

By checking when the format is MXF, the

information are closed within GOP. It increases

the data size, but allows re-editing with editor

software that can handle GOP. Uncheck it

normally.

TIP

•

You can load a file being recorded to an external media/storage
to editing software, and operate time-shift editing.

Loading and editing T2 contents to editing software

►

P77

•

When recording data in Grass Valley HQ (AVI format), chasing
playback is available.

Loading and playing back video currently recorded (chasing
playback)

►

P104

•

You can select 16bit 2ch or 24bit 8ch audio when recording via

SDI.

NOTE

•

When recording data in the MXF (XDCAM HD422/HD/IMX/
DV) format, playback cannot be operated on all of the sources.
The playback will be stopped.

•

When recording data in the MXF (XDCAM HD422/HD/IMX/
DV) format, chasing playback, chasing export, and format

conversion are not available.

Set each item and tap [OK].

Tap [Apply] to keep on making settings of other items.

207

May 16, 2016

T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express User Manual

R1 settings

Summary of Contents for T2 Elite


















































































































































































































































































Search results

Summary of Contents for T2 Elite

Reviews:

Related manuals for T2 Elite

Brands by name

Popular brands

GRASS VALLEY T2 Elite, User Manual

Search results

Summary of Contents for T2 Elite

Reviews:

Related manuals for T2 Elite

Brands by name

Popular brands