GRASS VALLEY T2 Elite User Manual Download Page 38

Page: 38 / 273

Rear panel

Rear panel (T2 Elite 2/Pro 2/Express 2)

(1)

(2)

(3)

(4)

(8) (9)

(6)
(7)

(5)

(10)

(13)

(11)

(12)

(14) (15)

(16)

(1)

AC Power inlet (3-
pin)

Used to connect to the AC power outlet

with the supplied power cable.

(2)

Main power switch

Turns on/off the main power.

(3)

Analog audio input/
output section

Used for analog audio input/output.

Analog audio input/output section

►

P40

(4)

LAN port

Used to connect a LAN cable.

(5)

R1 input section

Used for input to the R1 channel.

R1 input section

►

P41

(6)

P1 output section

Used for output from the P1 channel.

P1/P2 output section

►

P41

(7)

P2 output section

Used for output from the P2 channel.

P1/P2 output section

►

P41

(8)

Monitor (VGA) port

Used to connect a PC monitor.

(9)

Monitor (DVI-I) port

Used to connect a PC monitor.

(10)

USB 3.0 port

Used to connect USB 3.0 removable devices.

(11)

USB 2.0 port

Used to connect a keyboard, mouse, and so

on.

(12)

Sound

Not used.

(13)

REF IN

Used to input REF signal.

(14)

GPI I/O

Used for GPI input/output.

(15)

REMOTE RS422 port

Used for remote control of R1, P1, P2

channels.

T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express User Manual

May 16, 2016

Section 3 ― Part Names and Functions

Summary of Contents for T2 Elite


















































































































































































































































































Search results

Summary of Contents for T2 Elite

Reviews:

Related manuals for T2 Elite

Brands by name

Popular brands

GRASS VALLEY T2 Elite, User Manual

Search results

Summary of Contents for T2 Elite

Reviews:

Related manuals for T2 Elite

Brands by name

Popular brands