Command
Channel-
less mode
R1
P1/P2
Sync
mode
Fill/Key
signal
output
mode
Supplementary note on T2
operation
C2.26
Transfer ID
No
No
No
No
No
Not supported on T2.
C2.25
Extended
Transfer ID
Setting of In and Out points is
only supported for FFFFFFFF.
(The range for the transfer
cannot be set.)
The setting for the transfer type
will be disabled. The transfer
type follows the settings in
[Transfer] -> [AVI] or [Playlist]
on the setting screen.
The recommended transfer
type is 0x03 (Profile), which
is described in “K2_Protocol_
developers_Guide” as a sample of
transfer via Grass Valley server.
Set the clip/playlist name for
the transfer source of export.
Set the transfer destination as
follows.
•
Network Drive:localhost/[n]:/
[dir]/[file name]
For “n”, specify the network
drive allocated by [General] ->
[Network-3] on the setting screen
or the drive connected via USB.
Example)localhost/z:/Export/Clip1
•
FTP server:[address]/v:/[bin
name]/[file name]
For address, specify the
address registered in [Hose
Name/IP Address] in [FTP
Export List] of [General] ->
[FTP] on the setting screen.
Example)169.254.138.3/v:/
Default/Clip1
267
May 16, 2016
T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express User Manual
AMP command list
