When starting up for the first time, T2 will start up in the front panel mode.
The display appears in the 3ch view on the touch screen LCD.
Other than the first time, T2 will start up in the previously used operation
mode (front panel mode or workstation mode).
TIP
•
To start up T2 in the workstation mode, start up T2 in the front
panel mode, and then switch to the workstation mode.
Switching from the front panel mode to the workstation
mode
Exiting T2 in the front panel mode
NOTE
•
Do not forcibly exit T2 by holding down the power switch or
turning off
the main power switch on the T2 rear panel
. A
malfunction may occur.
1
Press one of the [R1], [P1], or [P2] button.
You can also perform the operation by tapping [1ch View] on the touch
screen LCD or [Bin].
2
Tap [Menu], and then tap [Tools] -> [Exit].
3
Select [Shut Down] from the list and tap [OK].
To restart T2, select [Restart].
If you do not use T2 for a long time, turn off the main power switch on the
T2 rear panel and unplug the power cord.
Exiting T2 in workstation mode
NOTE
•
Do not forcibly exit T2 by holding down the power switch or
turning off
the main power switch on the T2 rear panel
. A
malfunction may occur.
44
T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express User Manual
May 16, 2016
Section 4 ― Connection/Start-up/Exit