GRASS VALLEY T2 Elite User Manual Download Page 35

Page: 35 / 273

(8)

Control buttons

Performs channel selection or playing back

and recording of video.

Control buttons

►

P36

Media card reader (T2 Elite 2 only)

(1) (2)

(3)

(4)

(1)

Exclusive SSD drive
slot

Used to read and write data in an inserted

SSD.

(2)

Compact Flash card
slot

Used to read and write data in an inserted

Compact Flash card.

(3)

SD card slots

Used to read and write data in an inserted

SD card.
Only the SD card slot on the right supports

UHS-II/microP2.

(4)

SxS memory card
slot

Used to read and write data in an inserted

SxS memory card.

Any card other than SxS memory card
such as an ExpressCard will not operate.

NOTE

•

While any of the indicators for media cards blinks in green,
data is being read or written. Do not insert or remove a media

card.

May 16, 2016

T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express User Manual

Front panel

Summary of Contents for T2 Elite


















































































































































































































































































Search results

Summary of Contents for T2 Elite

Reviews:

Related manuals for T2 Elite

Brands by name

Popular brands

GRASS VALLEY T2 Elite, User Manual

Search results

Summary of Contents for T2 Elite

Reviews:

Related manuals for T2 Elite

Brands by name

Popular brands