GRASS VALLEY T2 Elite User Manual Download Page 40

Page: 40 / 273

(12)

REF IN

Used to input REF signal.

(13)

GPI I/O

Used for GPI input/output.

(14)

REMOTE RS422 port

Used for remote control of R1, P1, P2

channels.

(15)

MONITOR

Used for audio monitor.

NOTE

•

In the workstation mode, you cannot use T2 with the monitor
ports (VGA/DVI-I) connected simultaneously. (Exclusive use
only)

•

Be sure to turn off your T2 when removing and inserting the
cable for the monitor ports.

Analog audio input/output section

(1)

(2)

(3)

(1)

R1 - CH1
R1 - CH2

Used for audio input to the R1 channel.

(Balanced audio input.)
XLR-3-31 × 2 (CH1 - 2)

(2)

P1 - CH1
P1 - CH2

Used for audio output to the P1 channel.

(Balanced audio output.)
XLR-3-32 × 2 (CH1 - 2)

Audio level detail display (P1/P2 channel)

►

P162

(3)

P2 - CH1
P2 - CH2

Used for audio output to the P2 channel.

(Balanced audio output.)
XLR-3-32 × 2 (CH1 - 2)

Audio level detail display (P1/P2 channel)

►

P162

T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express User Manual

May 16, 2016

Section 3 ― Part Names and Functions

Summary of Contents for T2 Elite


















































































































































































































































































Search results

Summary of Contents for T2 Elite

Reviews:

Related manuals for T2 Elite

Brands by name

Popular brands

GRASS VALLEY T2 Elite, User Manual

Search results

Summary of Contents for T2 Elite

Reviews:

Related manuals for T2 Elite

Brands by name

Popular brands