Melco N1 Series Software Manual Download Page 1

Page: 1 / 57

High-Res Digital Music Library

N1 Series

Software Manual

This manual uses sample screenshots captured on firmware version 3.50. Depending on the firmware version that

is installed on your N1, functions described and screenshots contained in the manual may appear differently, so

functions on your product may not work as described the manual. Always update the firmware to the latest version.

The firmware version installed will show up during startup, or you can check it by opening the main menu and

scrolling to option 5, "System Update".

For the procedure of updating the firmware to the latest version, refer to the "Updating the Firmware" section in

chapter 3.

Please make sure to read this manual before using and follow the procedures. If you have any inquiries about the

product, contact the number on the warranty statement or the packing box. Do not discard the warranty statement

or the packing box.

35021285-03

2017.06

Summary of Contents for N1 Series


























































Search results

Summary of Contents for N1 Series

Reviews:

Related manuals for N1 Series

Brands by name

Popular brands

Melco N1 Series, Software Manual

Search results

Summary of Contents for N1 Series

Reviews:

Related manuals for N1 Series

Brands by name

Popular brands