manualshive.com logo in svg

GRASS VALLEY K2 BASECAMP EXPRESS, Installation And Service Manual

"Upgrade Instructions and user manual for the GRASS VALLEY K2 BASECAMP EXPRESS are now available for free download at our website. Discover step-by-step guidance and essential information to enhance your product experience. Simply visit manualshive.com to access these valuable resources and optimize the functionality of your K2 BASECAMP EXPRESS."

Share
Download
background image

Recovering from a failover.................................................................................................................284

Working with K2 Media Servers............................................................................................................284

Accessing K2 Media Server features in the K2Config application ...................................................285
Taking a K2 Media Server out of service...........................................................................................285
Using the Stop button in Server Control Panel..................................................................................286
Placing a K2 Media Server in service ..............................................................................................287
Shutting down or restarting a K2 Media Server................................................................................287
Identifying K2 Media Server software versions.................................................................................287
Modifying K2 Media Server network settings....................................................................................287
Configuring Server 2008 for domain.................................................................................................288
Restoring network configuration........................................................................................................289
Removing a K2 Media Server...........................................................................................................293
Replacing a K2 Media Server...........................................................................................................293
Replacing an iSCSI interface adapter (TOE card)............................................................................295
Installing the Fibre Channel card driver............................................................................................296
Recovering from a failed K2 Media Server system battery...............................................................296
Checking K2 Media Server services.................................................................................................297
Licensing a K2 Media Server............................................................................................................299

Working with K2 clients.........................................................................................................................301

Accessing K2 client features in the K2Config application ................................................................301
Shutting down or restarting a K2 client.............................................................................................302
Taking a K2 client offline...................................................................................................................302
Bringing a K2 client online ................................................................................................................302
Adding a K2 client.............................................................................................................................302
Removing a K2 client........................................................................................................................303
Identifying K2 client software versions..............................................................................................303
Modifying K2 client control network settings.....................................................................................304
Modifying K2 client media (iSCSI) network settings..........................................................................304
Enabling and disabling the write filter using K2Config......................................................................305
Configure live streaming multicast using K2Config...........................................................................306

Using Storage Utility.............................................................................................................................308

Accessing Storage Utility..................................................................................................................308
Overview of Storage Utility................................................................................................................309

Working on the media file system and database..................................................................................309

Checking the media file system........................................................................................................310
Cleaning unreferenced files and movies...........................................................................................310
Making a new media file system.......................................................................................................311
Expanding the media file system by capacity...................................................................................313
Expanding the media file system by bandwidth................................................................................314
Recovering the media database.......................................................................................................319

Working with RAID storage...................................................................................................................320

Checking RAID storage subsystem status........................................................................................321
Checking controller microcode..........................................................................................................321
Identifying disks.................................................................................................................................321
Get controller logs.............................................................................................................................323
Unbind RANK....................................................................................................................................324
About full/background bind................................................................................................................325
Bind RANK........................................................................................................................................325
Binding Hot Spare drives..................................................................................................................327
Loading RAID controller and expansion chassis microcode.............................................................327
Downloading disk drive firmware......................................................................................................328
Replacing a disk module...................................................................................................................329
Replacing a controller.......................................................................................................................330
Configuring RAID chassis network and SNMP settings....................................................................331

Working with Ethernet switches............................................................................................................333

Design considerations for Ethernet switches....................................................................................333
Configuring a switch through the K2Config application ....................................................................335
Verifying spanning tree settings........................................................................................................335

02 February 2012 

K2 SAN Installation and Service Manual 

9

Contents

Summary of Contents for K2 BASECAMP EXPRESS















































































































































































































































































































































































Reviews:

No comments

Related manuals for K2 BASECAMP EXPRESS

Accelerated Dial-to-IP 5301-DC User Manual preview
Dial-to-IP 5301-DC
Brand: Accelerated Pages: 26
Danfoss VLT Micro Drive FC 51 Series Manual preview
VLT Micro Drive FC 51 Series
Brand: Danfoss Pages: 28
Danfoss VLT Micro Drive FC 51 Series Operating Instructions Manual preview
VLT Micro Drive FC 51 Series
Brand: Danfoss Pages: 73
Danfoss VLT AutomationDrive FC 300 Quick Start Manual preview
VLT AutomationDrive FC 300
Brand: Danfoss Pages: 4
Danfoss VLT AutomationDrive Operating Instructions Manual preview
VLT AutomationDrive
Brand: Danfoss Pages: 89
ICP DAS USA tM-752N Series Quick Start Manual preview
tM-752N Series
Brand: ICP DAS USA Pages: 7
YASKAWA D1000 Series Instruction Manual preview
D1000 Series
Brand: YASKAWA Pages: 251
Lenze i510-Cabinet Manual preview
i510-Cabinet
Brand: Lenze Pages: 132
IRiver MPlayer User Manual preview
MPlayer
Brand: IRiver Pages: 33
Gbxpoint SX-HVY02 Operating Instructions preview
SX-HVY02
Brand: Gbxpoint Pages: 4
Dolby Laboratories SEU4 User Information preview
SEU4
Brand: Dolby Laboratories Pages: 23
DAB MCE-150/P Instructions Manual preview
MCE-150/P
Brand: DAB Pages: 1024
Barco NGS-D220 Quick Start Manual preview
NGS-D220
Brand: Barco Pages: 2
Prism Sound ADA-8 Module Reference preview
ADA-8
Brand: Prism Sound Pages: 63
Triotech XBMC Clearstream Quick Start Manual preview
XBMC Clearstream
Brand: Triotech Pages: 16
Tripp Lite PowerVerter RV Inverter/Charger RV1512UL Specifications preview
PowerVerter RV Inverter/Charger RV1512UL
Brand: Tripp Lite Pages: 5
C&C TECHNIC TAIWAN CO., LTD. PG-H1 User Manual preview
PG-H1
Brand: C&C TECHNIC TAIWAN CO., LTD. Pages: 20
Photonic Universe 10A dual battery solarcharging kit Instruction Manual preview
10A dual battery solarcharging kit
Brand: Photonic Universe Pages: 7

Brands by name

Popular brands

Load more brands