GRASS VALLEY K2 BASECAMP EXPRESS, Installation And Service Manual

Page: 350 / 366

12. In the Create a Zone dialog, enter
Zone2
as the name for the new zone, and click the
OK
button.
The new zone name is displayed in the Zone Sets tree.
13. Click the
Apply
button. In the Save Zoning & Error Check dialog, click
Save Zoning
, then
Yes
,
OK
, and
Close
on subsequent message boxes.
You can ignore a "Error activating zone set" message.
14. When a zone is created, its zone type is soft. For Zone1 and Zone2, change the zone type to a
hard zone as follows:
a) In the Zone Sets tree, right-click the zone and select
Set Zone Type
from the popup menu.
b) In the Set Zone Type dialog, open the Zone Type pull-down menu and select
ACL
, then click
the
OK
button.
c) Repeat steps for the other zone.
15. In the Port/Device tree on the right of the Edit Zoning dialog box, select ports
0 - 7
(Shift + Click)
and drag them into the
Zone1
.
16. Click the
Apply
button. In the Save Zoning & Error Check dialog, click
Save Zoning
, then
Yes
,
OK
, and
Close
to save changes to the zoning database.
17. In the Port/Device tree on the right of the Edit Zoning dialog box, select ports
8 - 15
(Shift +
Click) and drag them into the
Zone2
.
350 K2 SAN Installation and Service Manual 02 February 2012
Custom K2 SAN systems