GRASS VALLEY K2 BASECAMP EXPRESS, Installation And Service Manual

Page: 286 / 366

6. Proceed as follows:
• If the server shuts down automatically, allow the shutdown processes to complete. Then start
the server. When a redundant server restarts, it comes up in an out of service state.
• If the server continues to run, it is in an out of service state.
Related Topics
Triggering an intentional failover on page 283
Using the Stop button in Server Control Panel on page 286
Using the Stop button in Server Control Panel
In Server Control Panel, the following behaviors occur when using the Stop button.
The following behavior
occurs. When you click the Stop
button on this server… With server(s) in this state… On a system with this
configuration of media file
system/metadata K2 Media
Servers…
The server automatically
powers itself down. This
causes a failover event to
occur and the backup server
becomes primary. When
you restart the former
primary server, it comes up
out of service. Primary Both primary and backup
are in service (online) Redundant servers
The server automatically
powers itself down. When
you restart the server, it
comes up out of service. Backup
The media file system
services stop, but the server
continues to run. It does not
automatically shut down.
The server is now out of
service. Primary Only the primary is in
service. The other server is
either shut down or it is
powered on but out of
service. Redundant servers
The media file system
services stop, but the server
continues to run. It does not
automatically shut down.
The server is now out of
service. Primary (the only server) The server is in service One (non-redundant) server
For Nearline K2 SANs, the Server Control Panel is not available from the K2Config application.
286 K2 SAN Installation and Service Manual 02 February 2012
Administering and maintaining the K2 SAN